Vaporesso Gen Mod
GEN makes high power devices more accessible than ever. 220W in a 107 gram body that feels soft but textured and durable, will feel like it’s part of you. GEN continues to give more in each inhalation – not only in the initial fire – to provide an extraordinary blow. Together with our new AXON chip it makes it easier than ever to operate.
The new Axon chip is a combination of the highest quality components that allows devices to deliver more, know more and do more for all users. Apart from the already established functions, new functions such as Pulse mode stand out. This innovative mode fires every 0.02 seconds to maintain previously introduced temperature control settings, creating a delicate controlled vaporization experience. In Smart TC mode, the Axon chip will automatically recognize if you have introduced a resistance for temperature control and will give you the optimal configuration for the best possible taste. Finally the Power Eco mode! With this mode activated, it will optimize your settings so you can vape with more time!
The soft-touch GEN case is made of 4 layers of coating, which gives it a soft rubber feel and makes it soft to the touch. Its protective coating makes it resistant to scratches and flame retardant.
2 x 18650 battery (Not included, it is recommended to use batteries without a stud of at least 35A)
Resistance Range 0.03ohm – 5ohm
Power range 75W – 220W
Voltage range 6.4V – 8.4V
2.5A load current
Size 146mm x 27mm x 54mm
Zinc Alloy Material
New AXON chip
Innovative Pulse and Smart TC mode
Lightweight and powerful 220W mod
2.5A fast charge
Multiple security protection
The Vaporesso Gen Mod comes with:
1x Vaporesso Gen Mod
1x Warranty Card
1x User Manual
1x USB cable
The NRG GT Core Coil by Vaporesso is designed for NRG/NRG SE tanks. The GT CCELL is a 0.5-ohm ceramic coil with optimal performance at 20-35 W. Each pack contains 3 coils.
Vaporesso GT Core Coils are designed to be compatible with most Vaporesso sub-ohm tanks such as Cascade One Kit and as well as the Smok baby TFV8 series, Eleaf Ello, OSB, and other small sub-ohm tanks.
GEN PT60 Kit Vaporesso
The GEN PT60 is the new pod mod in GEN family designed for DTL users. It’s equipped with the new xTank pod. With Double Top System and SSS Leak-Resistant Technology, it gives a Quadra leak resistance, better than a tank.
The COREX inside – a flavor boosting technology, increases the flavor and the lifespan of GTX coil with innovation on the cotton and the MESH. It can also be fully compatible with the whole coil platform.
With Double Top System and SSS Leak-Resistant Technology, the xTank gives a Quadra leak resistance, better than a tank. The COREX inside increases the flavor and the lifespan of GTX coil with innovation on the cotton and the MESH. It all fits in the light and elegant GEN PT60
• Dark Black
• Matte Grey
• Earth Brown
• Alpine Green
• Aegean Blue
• Length: 28mm
• Width: 35mm
• Height: 112mm
• Tank Capacity: 2ml
• Display: 0.91'' OLED Screen
• Battery: 2500mAh (build in)
• Power Range: 5-80W
• Resistance Range: 0.03~5Ω
• Charging Current: DC 5V/2A Type-C
How to charge
• Easy to charge via USB Type-C port. When battery indicate that is full, disconnect the wire. Never leave connected for night time and never leave the device connected to the charger unattended. If you do, you do so at your own risk.
How to fill
Filling from the side. To fill the tank or top up the liquid, just open the rubber closure located on the side of the tank. After filling, make sure that the rubber closure is properly closed. If you have a new coil, set aside the freshly filled tank for 5-10 minutes for the coil to soak up properly. It will protect it from immediate burning.
1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank
How to fit / exchange coil
1. Unscrew the thread base from the tank;
2. Lever the used coil by screwdriver, and pull it out;
3. Install a new coil to the tank;
4. Re-attach the thread base.
5. Screw the clearomizer onto your battery.
Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.
For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)
The kit contains:
• 1 x GEN PT60 MOD - battery capacity 2500mAh
• 1 x xTANK POD (2ml)
• 1 x GTX 0.2Ω MESH Coil (45-60W)
• 1 x GTX 0.4Ω MESH Coil (26-32W)
• 1 x Type-C USB Cable
• 1 x User Manual
The Zelos 3 mod for the Zelos 3 kit, the Zelos 3 will provide you premium MTL experience and extreme flavor enjoyment.
Mod Capacity: 3200 mAh
Output modes: WATT/ VOLTAGE/ BYPASS/ TC/ TCR/ CPS
Output wattage range: 1-80W
Output voltage range: 0.5-8.4V
Adjustable temperature range: 200-600℉/ 100-315℃
0.96” TFT color screen
Type-C 2A charging port
Mod dimensions: 38*28*81 mm
1 x Aspire Zelos 3 Mod
1 x USB Type-C Charging Cable
1 x User Manual
1 x Warranty Card
Aspire Puxos Mod
1* Puxos mod
1* USB Cable
1* Warning card
1* User manual
1* Warranty card
1* 18650 battery adapter preinstalled
Black, Lime/Green, Matte Grey, Midnight Blue, Silver
Black, Blue, Silver, Gray, Green, Brown
Black, Orange Red, Silver
Black, Gunmetal, Metallic Silver, Blue, Red, Pink