The Innokin GOs Pen Kit from Innokin is designed with flavour, convenience and affordability in mind. The Go S features a disposable 2ml refillable tank that has a slide to open, top filling system.
Utilising an internal 1500mAh battery and specially designed coils that use an organic cotton and wood pulp wick, the Innokin GOs Pen Kit will deliver on flavour and is incredibly simple to use.
1 x Innokin GO S 1500mAh Vape Device
1 x GO S 2ml Disposable Vape Tank
1 x USB Charging Cable
Tank Capacity: 2ml
Coils resistance: 1.6 Ohm
Coil Material: Kanthal
Wattage Output: 13W constant
Cut Off Time: 15 seconds
Max Output Current: 5.0A
Resistance Range: 0.6 Ohm - 3.5 Ohm
Body Material: Stainless Steel
Thread Type: 510
Battery Capacity: 1500mAh||
The Aspire K3 Starter Kit
The Aspire K3 Starter Kit
The¬†Aspire K3 Starter Kit¬†¬†is a new starter kit from Aspire.¬†The Aspire K3 Starter Kit¬†¬†is a step above the typical starter kit in 2 significant ways:
It uses the most popular coil ever made: The¬†Aspire Nautulis Coil¬†and ¬†Aspire Triton Mini Coils
It comes with a 1200 mAh battery for a longer lasting battery capacity
TheAspire K3 Starter Kit¬†¬†is of course rechargeable and refillable to make it a very cost effective vaping kit.¬†The¬†¬†Aspire K3 Starter Kit¬†is¬†a full kit with everything you need to start vaping (no eJuice in the kit) - simply add your eJuice and you will be set.
Being an Aspire products - the¬†Aspire K3 Starter Kit¬†¬†is very high quality and performs really well.
Aspire Nautilus Coils
Aspire Triton Mini Coils
The¬†Aspire K3 Starter Kit¬†¬†is a very interesting starter kit, because the K3 atomizer uses Nautilus coils, it provides a very good vaping experience while being extremly simple to operate. The K3 atomizer's capacity is 2 ml which is greater than the K2 atomizer's capacity at 1.8 ml.
1 x 2 ml Aspire K3 atomizer tank
1 x Aspire Coil pre-installed
1 x extra¬†Aspire Coil
1 x Aspire K3 battery 1200 mAh (Carbon Fiber design)
1 x micro USB Cable
1 x Instruction Manual
1 x acrylic presentation box
Tank Capacity: 2 ml
Uses the most popular coil ever made: the Aspire Nautilus Coils¬†and Aspire Triton Mini Coils¬†with Kanthal wire and organic cotton
Battery Capacity: 1200 mAh
Aspire K3 atomizer with a Pyrex glass tube
Aspire K3 has a standard 510 connection||
SMOK RPM40 Pod Kit
SMOK RPM40 Pod Kit Have you ever imagined a special vape device combining the advantages of both pod devices and box mods?
Now¬†the RPM40 appears as you required! It is small in size but has a battery capacity of 1500mAh and a power range of 1W-40W for you to adjust.
The internal IQ-R chip is a new one, shortening the firing time to 0.001S, and charging time to two hours.
Besides, the newly designed RPM Mesh 0.4Œ© Coil is designed for the best flavor and excellent vapor production.
Innovation keeps changing the vaping experience!
RPM40 is an ultra portable pod mod that shapes like a cuboid, and is covered with glossy finish and characteristic material, making the whole device look fancy and stylish.
Different from normal tiny and slim pod devices, RPM40 is designed with a 0.96 inch screen, with which, detailed vaping data is clearly presented, like the wattage, resistance, voltage, screen color, puff number and battery level.
SMOK RPM40 Pod Kit
Size: 25 x 25 x 99 mm
Battery Capacity: 1500mAh built-in
E-Juice Capacity: 2ml (EU 2ml Edition)/4.5ml (Standard Edition)/4.3ml¬†(Standard Edition)
Standby Current: <140uA
Input Voltage: 3.3V-4.2V
Output Voltage: 0.5V-4.1V
Firing Time: 0.001S
Output Wattage: 1W-40W
Charging Current: 0.88A (Max)
Charging Voltage: 5V
Output Mode: Watt
Resistance Range: 0.2ohm - 2.5ohm
Overcharge Voltage: 4.3V
Overdischarge Voltage: 2.4V
Ultra portable pod mod that shapes like a cuboid
Larger 1500mAh battery for¬†longer vaping time
Newly IQ-R chip¬†shortening the firing time to 0.001S
0.96 Inch screen to clearly show the¬†detailed vaping data
Multiple protections to avoid potential risks
Convenient to rebuild the coil
EU 2ml Edition
1 x RPM40 Device (1500mAh)
1 x RPM Standard Pod ( RPM Mesh 0.4ohm Coil Preinstalled) (2ml)
1 x RPM Nord Pod (Nord DC 0.6ohmCoil Preinstalled) (2ml)
1 x cable
1 x User Manual||
Vape the best of both MTL & DTL with the compact Innokin EZ.WATT Vaporizer!
The EZ WATT is amazing! It’s an unbeatable kit, premium quality and beautiful! It’s easy to operate and Great to Vape.
Do you enjoy puffing on incredible flavours with just the right amount of nicotine? Attach and vape the Endura T20S Tank with a Prism S coil for an unbeatably flavorful MTL puffing experience.
Looking for an amazing deep direct lung hit? Swap on the SlipStream tank and select 30 or 35Watts for big clouds and huge intense flavours. The bestselling Slipstream tank features full airflow control, top fill and an advanced top-down coil swap system.
It’s easy for anyone to vape great! Simply hold down the select and power button to cycle through 3 optimized wattage levels and press the Select button to choose from Low or High. The bright three colours LED clearly indicates the current wattage level (13 – 14 / 15 – 18 / 30 – 35).
Quality you can trust! The EZ.WATT has integrated safety protections and is backed by the Innokin 90 Day limited warranty.
Innokin EZ.WATT Starter Kit.
Vaporesso SKY Solo Plus Kit 2ml with 3000 mAh battery still sleek and very stylish available in four colours.
The pre-installed GT meshed coil maximize interaction with the cotton, providing turbo heating performance and increasing the heating area, making for dense and flavour clouds.
Compatible with coils like: GT | QF
OMNI's advanced chipset more focused. The OMNI board MINI takes the most advanced features from Vaporreo's OMNI chipset and focus it for safe and simple vaping.
How to charge
• Easy to charge via Micro 5pin USB port. When battery indicate that is full, disconnect the wire. Never leave connected for night time.
How to fill
Top E-liquid Filling: The e-liquid can easily be filled by removing the top cap only. Please let the tank stand for 5 minutes, so the cotton can be saturated with juice before using.
1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank
How to fit / exchange coil
1. Switch off the device
2. Detache tank (glass with mouthpiece) from the battery.
3. Unscrew the coil from device and swop with new one
4. Screw back (glass and mouthpiece) to the device
5. Now is the time to fill the tank with liquid. Let the tank stand for 5 minutes, so the cotton can be saturated with vape juice before using.
• Dimension 25*130 mm
• Tank Capacity: 2ml
• Battery: Lithium 3000mAh Built In
Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.
For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)
The kit contains:
• 1 x SKY SOLO PLUS Kit 2ml
• 2 x GT Meshed coil 0.18Ω
• 4 x O-Ring
• 1 x USB Charger Cable
• 1 x User Manual
The warranty period for particular kit elements is:
2 months from date of purchase:
• 3000 mAh battery
The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.
Tip - All batteries come with a 5-Click ON/OFF feature. This can help prevent you from unintentionally turning the battery ON. Simply press the button 5 times quickly in 2 seconds to turn the battery ON or OFF
IMPORTANT! When using a new atomizer / clearomizer, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the atomizer / clearomizer.||
The VOOPOO DRAG S kit is full of features not found in other vape pods. A generous 2500mAh built-in battery outputs up to 60W of power, whilst a large colour screen displays all the key vape settings at a glance. A USB-C charging port is present to allow fast and efficient recharging, plus the GENE.TT chip provides fast coil activation in just 0.001s and comes with a variety of protection features to keep you vaping safe.
The stylishly compact DRAG S body incorporates a tactile soft leather grip, with the front retaining the usual metal DRAG design seen in previous models. The DRAG S can be used in both auto or manual mode to suit various vaping styles, while an interesting ‘achievement’ system ranks every vape you take, scoring you from the base level ‘Iron’ through to ‘King’ depending on how you use the device.